Resumo O objetivo deste estudo foi avaliar o efeito da 1-etil-3- (3-dimetilaminopropil) carbodiimida (EDC) na resistência de união de pinos de fibra de vidro em canais radiculares obturados com diferentes cimentos endodônticos. Setenta e oito pré-molares inferiores foram obturados com três cimentos endodônticos (n=26): Endofill (END), AH Plus (AHP) e Endosequence BC Sealer (EBS). Após o preparo do espaço para pino, dois subgrupos formaram-se conforme a cimentação dos pinos (n=13): com EDC e sem EDC (controle - CON). Os espécimes foram submetidos ao teste pull-out, classificação do modo de falha e avaliação da superfície do canal radicular por microscopia eletrônica de varredura após o deslocamento. Quanto à força de resistência de união, uma diferença estatisticamente significativa ocorreu entre os subgrupos EDC e CON apenas no END (p=0,001). Não foi detectada diferença entre os subgrupos CON (p=0,339). Contudo, no subgrupo EDC, o AHP apresentou maiores valores (END versus AHP: p=0,001; AHP versus EBS: p=0,016). Acerca da classificação dos modos de falha, o escore 1 (≥50% de cimento) foi o mais comumente observado, exceto para END + EDC. Restos de cimentos endodônticos e cimentos resinosos foram encontrados no terço cervical, mas sem diferença estatística (p=0,269), enquanto no terço médio, houve diferença (p=0,004). Em conclusão, o EDC diminui a resistência de união quando associado ao cimento END, sem alterar o modo de falha entre o cimento resinoso e o pino de fibra de vidro. O melhor desempenho foi observado quanto o EDC foi usado com o cimento AHP.

Abstract The aim of this study was to evaluate the effect of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) on bond strength of fiberglass posts in root canals obturated with different endodontic sealers. Seventy-eight mandibular premolars were obturated with three sealers (n=26): Endofill (END), AH Plus (AHP), and Endosequence BC Sealer (EBS). After preparation of the post space, two subgroups were formed according to the cementation of the posts (n=13): with EDC (EDC), and without EDC (control - CON). The specimens were submitted to a pull-out test, failure mode classification, and root canal surface evaluation by scanning electron microscopy after post displacement. Regarding the bond strength, a significant difference between the EDC and CON subgroups occurred only in the END (p=0.001). No difference was detected among the CON subgroups (p=0.339). However, among the EDC subgroups, AHP presented significantly higher values (END versus AHP: p=0.001; AHP versus EBS: p=0.016). Upon classification of failure modes, score 1 (≥ 50% of cement) was the most commonly observed, except for the END + EDC. Remains of endodontic sealers and resin cements were found in the cervical third, but without statistical difference (p=0.269), while in the middle third, difference occurred (p=0.004). In conclusion, EDC decreases bond strength when associated with END sealer, without changing the failure mode between the resin cement and fiberglass post. The best performance was observed when EDC was combined with AHP sealer.

Abstract: The aim of this study was to compare two irrigation techniques and four devices for endodontic sealer placement into the dentinal tubules. Ninety-nine single-rooted human teeth were instrumented and allocated to either the control (CO) (n=11) or experimental groups according to the irrigation method: syringe and NaveTip needle (NT) (n=44), and EndoActivator (EA) (n=44). These groups were subdivided according to sealer placement into K-File (KF), lentulo spiral (LS), Easy Clean (EC), and EndoActivator (EA) subgroups. Moreover, the distances of 5 mm and 2 mm from the apex were analyzed. The teeth were obturated with AH Plus and GuttaCore X3. Analyses were performed by scanning electron microscopy associated to cathodoluminescence. The percentage and maximum depth of sealer penetration were measured. Data were evaluated by three-way analysis of variance (ANOVA) and Games-Howell test (p<0.05). EA was superior to NT in percentage of sealer penetration. EC was significantly superior to EA (subgroup) for sealer penetration, and both improved the percentage of sealer penetration when compared to LS. Better sealer penetration was observed at the distance of 5 mm from the apex. Sealer penetration into the dentinal tubules was significantly improved by sonic irrigant activation.

Resumo O objetivo deste estudo foi verificar o estresse e a resistência ao deslocamento, pela análise de elementos finitos, de diferentes tipos de fixação em cirurgia ortognática mandibular. Um modelo 3D de elementos finitos sólidos de uma hemi-mandíbula foi obtido. Uma osteotomia sagital bilateral foi simulada e o segmento distal foi avançado 5 mm. Após o ajuste e sobreposição dos segmentos, foram simulados 9 diferentes tipos de osteossíntese com miniplacas e parafusos 2.0: A, uma miniplaca reta convencional de 4 furos; B, uma miniplaca reta lock de 4 furos; C, uma miniplaca convencional de 4 furos e um parafuso bicortical; D, uma placa lock de 4 furos e 1 parafuso bicortical; E, uma miniplaca reta convencional de 6 furos; F, uma miniplaca lock de 6 furos; G, duas miniplacas retas convencionais de 4 furos; H, duas miniplacas lock de 4 furos; e I, três parafusos bicorticais em um padrão L invertido. Em cada modelo foram aplicadas forças simulando os músculos mastigatórios. Foram verificados os valores da tensão nas placas e parafusos. A resistência ao deslocamento foi verificada no segmento proximal, uma vez que o segmento distal era estável. Foi medida a região com o maior deslocamento inferior e superior. O deslocamento entre os segmentos osteotomizados foi verificado por intervalos milimétricos. Parafusos bicorticais em L invertido foram o modelo que teve o menor descolamento inferior, e o modelo com a tensão mais baixa foi o de duas placas convencionais. Os resultados sugerem que a tensão foi melhor distribuída nas miniplacas do tipo lock, mas os parafusos de fixação apresentaram maior concentração de tensão.

Abstract The aim of this study was to evaluate the stress and dislodgement resistance by finite element analysis of different types of fixation in mandibular orthognathic surgery. A 3D solid finite element model of a hemi-mandible was obtained. A bilateral sagittal split osteotomy was simulated and the distal segment was advanced 5 mm forward. After the adjustment and superimposing of segments, 9 different types of osteosynthesis with 2.0 miniplates and screws were simulated: A, one 4-hole conventional straight miniplate; B, one 4-hole locking straight miniplate; C, one 4-hole conventional miniplate and one bicortical screw; D, one 4-hole locking miniplate and 1 bicortical screws; E, one 6-hole conventional straight miniplate; F, one 6-hole locking miniplate; G, two 4-hole conventional straight miniplates; H, two 4-hole locking straight miniplates; and I, 3 bicortical screws in an inverted-L pattern. In each model, forces simulating the masticatory muscles were applied. The values of stress in the plates and screws were checked. The dislodgement resistance was checked at the proximal segment since the distal segment was stable because of the screen at the occlusal tooth. The regions with the lowest and highest displacement were measured. The offset between the osteotomized segments was verified by millimeter intervals. Inverted-L with bicortical screws was the model that had the lowest dislodgment and the model with the lowest tension was the one with two conventional plates. The results suggest that the tension was better distributed in the locking miniplates, but the locking screws presented higher concentration of tension.

Resumo Este estudo teve como objetivo avaliar o desempenho dos sistemas Wave One, Easy ProDesign Logic e One Shape no preparo de canais radiculares ovais. Quarenta e dois incisivos inferiores foram randomizados em três grupos: Grupo I, Wave One primary (WO) (#25.08); Grupo II, Easy ProDesign Logic (EPL) (#25.06) e Grupo III, One Shape (OS) (#25.06). As amostras foram submetidas a microtomografia computadorizada antes e após o preparo. Não ocorreram fraturas de instrumento ou perda de comprimento de trabalho em qualquer dos três grupos. Houve diferença estatisticamente significante no volume total do canal radicular entre o WO e EPL. A média do percentual de área instrumentada do canal no terço médio foi 76,9% no grupo WO, 62,3% no grupo EPL e 71,8% no grupo OS (p>0,05). O sistema OS teve a correlação mais forte entre o aumento de volume e área instrumentada (R=0,63). Os sistemas WO, EPL e OS apresentaram tempos de preparo médios de 2,13 min, 0,54 min e 2,21 min (p<0,05). Todos os três sistemas foram seguros no preparo canais radiculares ovais. O sistema WO foi mais eficaz no aumento do volume de canal, entretanto, isso não afetou as áreas instrumentadas. O sistema OS teve a correlação mais forte entre o aumento de volume e área instrumentada, enquanto o sistema EPL foi o mais rápido.

Abstract This study aimed to evaluate the performance of the Wave One, Easy ProDesign Logic and One Shape systems in the preparation of long oval root canals. Forty-two mandibular incisors were randomized into three groups: Group I, Wave One Primary (WO) (#25.08); Group II, Easy ProDesign Logic (EPL) (#25.06) and Group III, One Shape (OS) (#25.06). Micro-computed tomography scans were obtained pre- and post-preparation of the samples. Instrument fractures or loss of working length did not occur in any of the groups. There was a statistically significant difference in total root canal volume between the WO and EPL (p<0.05) and OS systems (p<0.05) The mean percentages of instrumented canal area in the middle thirds were 76.9% in the WO, 62.3% in the EPL and 71.8% in the OS (p>0.05). The OS system had the strongest correlation between volume increase and instrumented area (R=0.63). The WO, EPL and OS systems presented mean preparation times of 2.13 min, 0.54 min, and 2.21 min (p<0.05), respectively. All three systems enabled the safe preparation of long oval root canals. The WO system most effectively increased root canal volume, but it did not affect the instrumented areas. The OS system had the strongest correlation between volume increase and instrumented area, while the EPL system was the fastest.

The objective of this study was to classify the morphology of bifid mandibular canals and to evaluate their relationship with the roots of third molars, using cone beam computed tomography (CBCT) scans. The CBCT scans of 75 patients were analyzed and the bifurcations were classified according to Langlais et al. (1985). The relationship of bifurcation and third molars was established according to the following classification: class A - uninvolved, class B - close relationship, class C - intimate relationship and class D - absence of third molars. Data were submitted to descriptive statistics, and the results indicated that the patients' mean age was 48.2 (± 13.2) years. Unilateral bifurcation (Type 1) was the most frequent type (72.6%), followed by unilateral Type 2 (19.3%). Class D was the most frequent (57.33%), followed by class C (21.33%), class B (13.33%) and class A (8%). It could be concluded that most cases presented unilateral bifid mandibular canals extending to the third molar or adjacent regions, and when present, the roots seemed to be a continuation of the bifid mandibular canal

O objetivo do presente estudo foi verificar a presença de desvio apical por meio da plataforma radiográfica, avaliar a ação dos instrumentos, centralização do preparo e ampliação por meio de imagens digitais do canal e calcular a porcentagem de superfícies regulares e presença de debris por meio da análise histológica. Dez raízes mésiovestibulares de molares superiores extraídos foram incluídos em blocos de resina e seccionados no terço médio e apical. O preparo do canal foi feito empregando o sistema RaCe, a 250 rpm e torque de 1 Ncm. Cada sistema rotatório foi usado 5 vezes no sentido coroa-ápice na seguinte sequência: 40/0.10, 35/0.08, 25/0.06, 25/0.04, 25/0.02 (comprimento de trabalho - CT), 30/0/02 (CT) e 35/0/02 (CT). Cada amostra foi avaliada por 3 métodos de estudo: plataforma radiográfica, imagem digital e análise histológica. A plataforma radiográfica mostrou ausência de transporte apical. Em relação à ação dos instrumentos sobre as paredes dentinárias, centralização do preparo, ampliação, porcentagem de superfícies regulares e presença de debris, o teste estatístico de Wilcoxon não mostrou diferença significativa entre os terços apical e médio. O sistema RaCe se mostrou adequado para o preparo de canais radiculares curvos em relação à manutenção do trajeto original do canal, ação sobre as paredes dentinárias, ampliação e remoção de debris da luz do canal radicular.

In this study, curved maxillary molar root canals were instrumented with RaCe rotary system to evaluate: 1. the occurrence of canal transportation using a radiographic platform; 2. the action of the instruments on the dentin walls, centering ability and canal enlargement by analysis of digital images; and the percentage of regular dentin surfaces and debris within the canal by histological analysis. Ten mesiobuccal roots of extracted human maxillary molars were embedded in acrylic resin and sectioned at the middle and apical thirds. Root canal shaping was performed using the RaCe rotary system at 250 rpm and 1 Ncm torque. Each instrument set was used five times according to a crown-down technique in the following sequence: 40/0.10, 35/0.08, 25/0.06, 25/0.04, 25/0.02 (working length - WL), 30/0.02 (WL) and 35/0.02 (WL). Each instrument was inserted until resistance was felt and then pulled back, followed by brushing movements towards all canal walls. Each specimen was assessed by three study methods: radiographic platform, digitized image assessment and histological analysis. The radiographic platform showed lack of apical transportation. No statistically significant difference (Wilcoxon test, p>0.05) was found between the middle and apical thirds regarding instrument action on dentin walls, centering ability, area of root canal enlargement, percentage of regular dentin surfaces and debris within the root canal. It may be concluded that RaCe system is a suitable method for the preparation of curved root canals, regarding the maintenance of root canal original path, action on dentin walls, canal enlargement and removal of debris from the root canal lumen.

Este caso descreve o tratamento multidisciplinar de um incisivo lateral superior permanente fusionado a um dente supranumerário, ambos apresentando necrose pulpar e lesão periapical. Paciente compareceu ao consultório se queixando de dor, edema e mobilidade do incisivo lateral superior. O preparo endodôntico foi realizado no sentido coroa-ápice e foi colocada pasta de hidróxido de cálcio como medicação intra-canal por 15 dias. A seguir, a obturação foi realizada pela termoplastificação da guta-percha. Após 18 meses, foram realizados exames clínicos e radiográficos indicando ausência de dor e edema. Dois anos após o tratamento endodôntico, o paciente retornou para o tratamento periodontal e estético. Nove meses depois, foi realizada tomografia computadorizada e observou-se presença de defeito periodontal e lesão periapical. Foi então indicada e planejada a cirurgia paraendodôntica. O dente supranumerário foi removido e a área de comunicação com o canal radicular do incisivo lateral foi preenchida; a loja cirúrgica foi preenchida com vidro bioativo e osso orgânico bovino desmineralizado. O tecido patológico da lesão periapical foi submetido à análise histopatológica sendo diagnosticado como cisto periapical. Um ano após a cirurgia parendodôntica, uma nova tomografia computadorizada mostrou neoformação óssea na região periapical do dente em questão. Doi anos após a cirurgia, a restauração foi trocada devido à motivos estéticos e uma radiografia periapical mostrou sucesso do tratamento (5 anos após o tratamento inicial). Um correto diagnóstico e plano de tratamento multidisciplinar é essencial para o sucesso do tratamento de dentes fusionados à dentes supranumerários.

This paper describes and discusses the multidisciplinary treatment involving a permanent maxillary lateral incisor fused to a supernumerary tooth, both presenting pulp necrosis and periapical lesion. A 15-year-old male patient sought treatment complaining of pain, swelling and mobility on the maxillary right lateral incisor. After clinical and radiographic examination, root canal preparation was performed according to the crown-down technique and a calcium hydroxide dressing was placed for 15 days. The patient returned and the definitive endodontic filling was done with thermomechanical compaction of gutta-percha and sealer. After 18 months, clinical and radiographic examinations were carried out and no pain or swelling was reported. Two years after endodontic treatment, the patient returned for periodontal and cosmetic treatments. Nine months later, a cone-beam computed tomography (CBCT) revealed that the previously detected periodontal defect and periapical lesion were persistent. Apical endodontic surgery was indicated. The supernumerary tooth was removed, the communicating distal surface was filled and the surgical site received bioactive glass and demineralized bovine organic bone. The pathological tissue was submitted to histopathological examination and the diagnosis was periapical cyst. One year after the apical endodontic surgery, CBCT showed bone formation at maxillary lateral incisor apical area. Two years after the surgery, the restoration was replaced due to aesthetic reasons and periapical radiograph showed success after 5 years of treatment. A correct diagnosis and establishment of an adequate treatment plan resulted in a successful management of the case.

O objetivo deste estudo foi avaliar a relação entre reação inflamatória induzida por quatro cimentos endodônticos e a presença de fibrose e quantidade de miofibroblastos que apresentam positividade para α-SMA. Tubos de polietileno foram preenchidos com o cimento (I: Endofill; II: AH Plus; III: Acroseal; IV: Epiphany) e inseridos em 4 regiões do dorso de 24 ratos Wistar, enquanto 2 tubos vazios (V - controle) foram inseridos em 6 ratos. Após 7, 21 e 45 dias, oito animais foram sacrificados obtendo 6 indivíduos por grupo e 2 para o grupo controle. Os fragmentos foram submetidos ao processamento histológico e à análise imuno-histoquímica para a proteína anti-α-SMA. Todos os grupos, exceto o controle, demonstraram notável reação inflamatória no 7º dia pós-operatório, que também coincidiu com uma grande quantidade de miofibroblastos. No 21º e 45º dia pós-operatório, a reação inflamatória induzida pelo Endofill, AH Plus e Acroseal diminuiu significativamente, o que coincidiu com reduzida presença de miofibroblastos e deposição de colágeno normal. Em contraste, no grupo Epiphany, infiltrado inflamatório significativo esteve presente em todos os períodos analisados. A persistência do infiltrado inflamatório induzido por cimento endodôntico pode também provocar uma fibrose associada com a presença de miofibroblastos.

The aims of this study were to evaluate the ratio between inflammatory reactions induced by four endodontic sealers and the occurrence of fibrosis and the number of myofibroblasts with positivity to α-smooth-actin muscle (α-SMA). Polyethylene tubes were filled with a root canal sealer (Endofill, AH Plus, Acroseal and Epiphany) and inserted into 4 site at the dorsal region of 24 Wistar rats; 2 empty tubes (control) were grafted in 6 rats. After 7, 21, and 45 days, 8 animals were euthanized, providing 6 specimens per test group and 2 specimens from the control group. The fragments were subjected to histological processing and immunohistochemical analysis for anti α-SMA protein. All specimens, except those from the control group, presented severe inflammatory reaction on the 7th postoperative day, which also coincided with a large number of myofibroblasts. On the 21st and 45th days post-surgery, the inflammatory reaction induced by Endofill, AH Plus and Acroseal decreased significantly, which coincided with reduced presence of myofibroblasts and usual collagen deposition. In contrast, in the group filled with Epiphany, significant inflammatory cell infiltrate was present in all analyzed periods. The persistence of an inflammatory reaction induced by endodontic sealer may also induce the development of fibrosis in combination with presence of myofibroblasts.

The purpose of this study was to investigate the influence of chlorhexidine (CHX) concentration on the microtensile bond strength (μTBS) of contemporary adhesive systems. Eighty bovine central incisors were used in this study. The facial enamel surface of the crowns was abraded with 600-grit silicon carbide paper to expose flat, mid-coronal dentin surfaces. The tested materials were Scotchbond Multipurpose (SMP), Single-Bond (SB), Clearfil SE Bond (CSEB) and Clearfil Tri S Bond (CTSB). All the materials were applied according to manufacturer's instructions and followed by composite application (Z250). The teeth were randomly divided into 16 groups: for the etch-and-rinse adhesives (SMP and SB), 0.12% or 2% CHX was applied prior to or after the acid etching procedure. For the self-etch adhesives (CSEB and CTSB) 0.12% or 2% CHX was applied prior to the primer. Control groups for each one of the adhesive systems were also set up. The specimens were immediately submitted to μTBS testing and the data were analyzed using Analysis of Variance and the Tukey post hoc test (alpha = .01). The failure patterns of the specimens were observed using scanning electron microscopy. The effects of 2% CHX were statistically significant (p < 0.01) for the self-etch adhesives but were not significant for the etch-and-rinse adhesive systems. Analysis of the data demonstrated no statistical difference between the etch-and-rinse adhesive systems. CHX-based cavity disinfectants in concentrations higher than 0.12% should be avoided prior to the self-etch adhesive systems evaluated in this study to diminish the possibilities of reduction in bond strength.

OBJECTIVE: This study investigated the influence of the last apical instrument of the ProTaper system with and without 2.5% sodium hypochlorite for cleaning mandibular central incisors. MATERIAL AND METHODS: Thirty two mandibular central incisors were divided into six study groups: Group I - F1 instrument with 2.5% sodium hypochlorite; Group II - F1 and F2 with 2.5% sodium hypochlorite; Group III - F1, F2 and F3 with 2.5% sodium hypochlorite; Group IV - F1 with distilled water; Group V - F1 and F2 with distilled water; Group VI - F1, F2 and F3 with distilled water. The two remaining teeth comprised the negative control group. The specimens were prepared following the principles of the technique suggested by the manufacturer and then submitted to histological preparation and morphometric analysis. Data were analyzed statistically by the Kruskal Wallis test at 1% significance level. RESULTS: There was statistically significant difference (p<0.01) between all study groups, except between Groups I and VI. CONCLUSIONS: It was concluded that no technique allowed complete cleaning of the root canals. However, the technique of finishing preparation of the apical third with the F3 instrument with 2.5% sodium hypochlorite irrigation was the most effective.

INTRODUÇÃO: O tratamento endodôntico tem seus procedimentos clínicos fundamentados em conhecimentos básicos, principalmente biológicos, cujo êxito do tratamento depende das condições dos tecidos da região apical e periapical, dos mecanismos de defesa orgânicos e da potencialidade de reparação das células. Diferentes materiais obturadores, com os mais diferentes componentes químicos, têm sido testados em busca de uma substância que tenha propriedades físico-químicas e principalmente biológicas ideais para perfeita vedação do canal radicular. Um fato importante referente aos insucessos nos tratamentos endodônticos diz respeito aos componentes tóxicos dos cimentos obturadores de canal, incluídos com o propósito de neutralizar as falhas de desinfecção durante o preparo do canal. OBJETIVO: Avaliar histologicamente o comportamento tecidual subcutâneo de ratos após implantes de tubos de polietileno preenchidos com cimentos obturadores de canal à base de hidróxido de cálcio (Sealapexâ, Apexitâ e Sealer 26â). MATERIAL E MÉTODO: Foram utilizados para este estudo 60 ratos, os quais foram divididos em oito grupos: quatro grupos experimentais, cada um com 10 ratos, e quatro grupos controle, com cinco ratos. Foram analisados em intervalos de 48 horas, 7, 21 e 60 dias. RESULTADOS: Os resultados da análise histológica mostraram que todos os cimentos foram irritantes, porém em intensidade que variaram entre si e em função do tempo. Nos períodos iniciais (48 horas e sete dias) todos os materiais exibiram resultados próximos, com quadro inflamatório entre severo e moderado, respectivamente. Nos períodos finais (21 e 60 dias), as reações teciduais aos implantes contendo o cimento Sealapexâ apresentaram quadro ativo, mas em fase involutiva, em relação aos cimentos Apexitâ e Sealer 26â. Os grupos controle apresentaram número de células inflamatórias inferior aos grupos experimentais, mantendo quadro reacional em fase involutiva. O método estatístico utilizado foi a análise de variância para que fosse feita uma comparação entre as médias. CONCLUSÕES: Conclui-se que o cimento Sealapexâ foi o mais biocompatível seguido pelo Apexitâ e Sealer 26â.

OBJECTIVE: To histologically evaluate the behavior of the subcutaneous tissue of rats after placement of polyethylene tubes filled with calcium hydroxide-based root canal sealers (SealapexTM, ApexitTM e Sealer 26TM). STUDY DESIGN: The study employed 60 rats, which were divided into eight groups, being four experimental groups with 10 rats each, and four control groups with five rats. Analysis was conducted at 48 hours, 7, 21 and 60 days. RESULTS: Histological analysis revealed that all sealers were irritant; however, the intensity varied between each sealer and as a function of time. At the initial periods (48 hours and seven days), all materials demonstrated similar outcomes, with inflammatory reaction from severe to moderate, respectively. At the final periods (21 and 60 days), the tissue reactions to the implants containing SealapexTM displayed an active status yet with regression, compared to the ApexitTM and Sealer 26TM. The control groups exhibited less inflammatory cells than the experimental groups, keeping a reaction status with regression. CONCLUSIONS: The results achieved in this study revealed that the SealapexTM sealer was the most compatible, followed by ApexitTM and Sealer 26TM.